The MX-T25-SET2 6MP T25 Video Door Station Complete Kit from MOBOTIX for a secure and easy-to-use surveillance setup. This kit comes with a T25 camera module with a fisheye lens, a KeypadRFID for contactless entry with 7 RFID cards, an InfoModule with indoor unit, an in-wall MX-DoorMaster door opener unit with different frames, a USB stick, a pen for plastic film, mounting hardware and materials, as well as an anti-theft triple frame for both in-wall and on-wall mounting to keep all the components neatly organized.

Designed to be used with the T25 Door Station, the white T25 6MP Day Outdoor Camera from MOBOTIX features a 6MP CMOS sensor to capture 3072 x 2048 resolution video at up to 8 fps. The camera features low-light sensitivity to monitor and view subjects at night in color, while LEDs on the upper part of the camera help further illuminate nearby surroundings.

You can talk to visitors through the built-in speaker and listen to them through the built-in microphone. This IP65-rated unit is suitable for outdoor use and is IK09-rated for impact resistance.

The white Keypad with Contactless RFID Technology from MOBOTIX can be used for several functions. Outdoors, it functions as an access control interface, either by entering a code on the keypad or by means of keyless access using a transponder (as a check card). The module can also be used by visitors and residents to record and playback messages.

The white Mx2wire Info Module from MOBOTIX is equipped with Mx2wire technology and a second Mx2wire unit for mounting inside the building. It offers users not only the standard info module functions but also the option to connect and supply power to the door station via 2-wire cabling instead of a network cable.

Using the Mx2wire system, an Ethernet network with PoE can be established using existing cables up to 1,640.4’ (500m). You can utilize a 2-wire cable that is no longer in use (analog telephone line, antenna cable or bell wire, for instance) to connect a 10/100 Mb/s Ethernet device such as a PC, WLAN, IP camera, IP telephone, or IP door station without having to lay any new cables or implement any other constructional measures. An (identical) Mx2wire unit is required at both ends of the cable, and it automatically configures itself as either the sender or the receiver.

The significant additional benefit of Mx2wire is that in addition to data, the power to operate PoE end devices (Power over Ethernet according to the IEEE 802.3af standard, a MOBOTIX network camera, for example) can also be transferred via the 2-wire cable.

Mx2wire is supplied via PoE from the network input cable. The connected end devices are supplied with up to 7W via PoE. Mx2wire does not therefore require its own power supply, as the network distributor (switch) typically supplies power over the data cables (PoE) so that the two Mx2wire units as well as the standard PoE end device are supplied power.