facebook-pixel
 
You have no items in your shopping cart.
Search
Filters
Close

Nexhi 16-Port 10/100Mbps with 8-Port PoE Web Smart Ethernet Switch

SKU: NXS-FNSW-1608PS-SW
Availability: Out of stock
Manufacturer: Nexhi
The FNSW-1608PS 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8) is a budget friendly solution that allows for quality and reliable network for power and data. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.
$343.99

 

The FNSW-1608PS 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8) is a budget friendly solution that allows for quality and reliable network for power and data. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.

 

The FNSW-1608PS reduces cabling and the need for specialized power outlets. A single wire takes both data and power, thus lowering the costs of installation. This unit also showcases energy efficiency and allows more switching power supply. This unit is much more efficient than 4 linear power adapters.

 

Providing 8 PoE interfaces, the FNSW-1608PS features 8 PoE interfaces and is the perfect fit for small businesses and workgroups that need to extend PoE. Extend PoE for is ideal for small business and workgroups requiring to deploy IP-based surveillance camera, IP phones, PoE for the wireless access points, or IP-based surveillance camera in any location.
Manage the PoE power to devices via Web and Console interfaces. This unit also showcases switch features such as QoS, VLAN, Trunk, and bandwidth control are available for network management.

 

 

Features:

 

  1. Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
  2. 16-Port 10/100Mbps with 8-Port PoE Web Smart PoE Switch
  3. 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8)
  4. Each Switching port supports auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) supported
  5. Auto-MDI / MDI-X detection on each RJ-45 port
  6. Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
  7. High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
  8. 4K MAC address table, automatic source address learning and ageing
  9. 2.75Mb embedded memory for packet buffers
  10. Remote Web interface for Switch management and setup
  11. SNMP Trap for alarm notification of events
  12. Broadcast Storm Control support
  13. Supports up to 16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
  14. Supports up to 2 Trunk groups, each trunk for up to maximum 4 ports with 800Mbps bandwidth
  15. Supports QoS, bandwidth control and MAC address filter / TCP & UDP filter on each port
  16. Supports port mirroring function and IGMP Snooping v1 / v2
  17. PoE power Disable/Enable and PoE power consumption monitoring by management interface
  18. Firmware upgrade through Web interface
  19. Password setting, IP setting and device description setting through Planet Smart discovery utility
  20. 19-inch rack mount size
  21. Internal full-range power supply suitable for worldwide use
  22. EMI standards complies with FCC, CE class A

 

 

The FNSW-1608PS 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8) is a budget friendly solution that allows for quality and reliable network for power and data. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.

 

The FNSW-1608PS reduces cabling and the need for specialized power outlets. A single wire takes both data and power, thus lowering the costs of installation. This unit also showcases energy efficiency and allows more switching power supply. This unit is much more efficient than 4 linear power adapters.

 

Providing 8 PoE interfaces, the FNSW-1608PS features 8 PoE interfaces and is the perfect fit for small businesses and workgroups that need to extend PoE. Extend PoE for is ideal for small business and workgroups requiring to deploy IP-based surveillance camera, IP phones, PoE for the wireless access points, or IP-based surveillance camera in any location.
Manage the PoE power to devices via Web and Console interfaces. This unit also showcases switch features such as QoS, VLAN, Trunk, and bandwidth control are available for network management.

 

 

Features:

 

  1. Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
  2. 16-Port 10/100Mbps with 8-Port PoE Web Smart PoE Switch
  3. 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8)
  4. Each Switching port supports auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) supported
  5. Auto-MDI / MDI-X detection on each RJ-45 port
  6. Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
  7. High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
  8. 4K MAC address table, automatic source address learning and ageing
  9. 2.75Mb embedded memory for packet buffers
  10. Remote Web interface for Switch management and setup
  11. SNMP Trap for alarm notification of events
  12. Broadcast Storm Control support
  13. Supports up to 16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
  14. Supports up to 2 Trunk groups, each trunk for up to maximum 4 ports with 800Mbps bandwidth
  15. Supports QoS, bandwidth control and MAC address filter / TCP & UDP filter on each port
  16. Supports port mirroring function and IGMP Snooping v1 / v2
  17. PoE power Disable/Enable and PoE power consumption monitoring by management interface
  18. Firmware upgrade through Web interface
  19. Password setting, IP setting and device description setting through Planet Smart discovery utility
  20. 19-inch rack mount size
  21. Internal full-range power supply suitable for worldwide use
  22. EMI standards complies with FCC, CE class A

 

Products specifications
Specification Property Hardware Specification : Fast Ethernet Ports : 16 10/ 100Base-TX RJ-45 Auto-MDI / MDI-X ports
: Power over Ethernet ports : 8-Port with PoE injector function (Port 1 to port 8)
: Switch Processing Scheme : Store-and-Forward
: Throughput (packet per second) : 2.38Mpps
: Switch Fabric : 3.2Gbps
: Address Table : 4K entries
: Share Data Buffer: 2.75Mb embedded memory for packet buffers
: Flow Control: Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
: Dimension (W x D x H): 440 x 120 x 44 mm (1U height)
: Weight: 1.75 kg
: Power Requirement: 100-240V AC, 50-60 Hz, 1A
: System operation Power Consumption / Dissipation (Full load): 13 watts / 46BTU
: Temperature: Operating: 0~50 Degree C
: Storage: -40~70 Degree C
: Humidity Operating: Operating: 5~90% (Non-condensing)
: Storage: 5~90% (Non-condensing)
Power over Ethernet : PoE Standard: IEEE 802.3af Power over Ethernet / PSE
: PoE Power Supply Type:End-Span
: PoE Power Output: Per Port 48V DC, 350mA. Max. 15.4 watts
: Power Pin Assignment: 1/2(+), 3/6(-)
: Power Budget: 110 watts
Smart function : System Configuration: Web interface
: Alert Trap: SNMP Trap for alarm notification of events
: Port configuration: Port speed duplex mode selection. Flow control disable / enable. Port disable / enable. Port description on each port
: Bandwidth Control: Yes, 1Mbps / 2Mbps / 4Mbps / 8Mbps / 16Mbps / 32Mbps / 64Mbps
: Broadcast Storm Control: Yes, 5% / 10% / 25% / 50% / Disable
: Port Statistics: Display each port’s detail Ethernet traffic counter information
: VLAN: 16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
: Port trunking: Supports 2 groups of 4-Port trunk support, up to 800Mbps bandwidth per trunk
: Port Mirroring: Port mirroring allows monitoring of the traffic across any port in real time
: QoS: Allows to assign low / high priority on each port
: First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
: MAC address / TCP & UDP filter: Yes
: IGMP Snooping v1 / v2: Allow to disable or enable
: PoE power control: Allows to disable or enable power provision and assign priority on each PoE port
Standards Conformance : Regulation Compliance: FCC Part 15 Class A, CE
: Standards Compliance: IEEE 802.3:Ethernet
: IEEE 802.3u:Fst Ethernet
: IEEE 802.3x:Full-duplex Flow control
: IEEE 802.3af:Power over Ethernet
: IEEE 802.1Q:VLAN
: IEEE 802.1p:QoS